製品情報 カテゴリ毎の一覧

Generating calibration gas with a permeation tube

Permeation tube vinyl chlorideP-131-H

Concentration range 0.8 - 58 ppm
*As Permeation tubes have individual differences in permeation rates, the above concentration ranges may differ slightly from the actual range that can be controlled.

Generating calibration gas with a permeation tube

Permeation tube vinylidene chlorideP-130-H

Concentration range 0.16 - 8.2 ppm
*As Permeation tubes have individual differences in permeation rates, the above concentration ranges may differ slightly from the actual range that can be controlled.

Generating calibration gas with a diffusion tube

Diffusion tube3100

Suitable for continuous generation of single component gases for calibration over sustained periods of time.

Generating calibration gas with a diffusion tube

Diffusion tube for multiple components3200

Solvents such as thinner contain multiple components. Previous models permit the generation of single component gases for calibration purposes. However, a multiple component type diffusion tube enables the simultaneous generation of 4 types of gases for calibration. Employing this tube enhances analytical testing.

Pressure reducerCG1-10

Pressure reducer (IN: ISO12209 male, OUT: 21KAAK13MPN)

Flow metersCG1-13

Flow meters (FS 200mL/min, FS 5L/min, rubber hose)

AdapterCG1-11/CG1-12/CG1-14/CG1-15/CG1-16/CG1-17

Adapter
CG1-11(ISO12209 female x ISO12209 female for 232 bar),
CG1-12(ISO12209 female x ISO12209 female for 300 bar),
CG1-14(CGA347 female x ISO12209 female),
CG1-15(CGA347 male x ISO12209 female),
CG1-16(CGA346 female x ISO12209 female),
CG1-17(CGA346 male x ISO12209 female)

Protective cover for detector tubeGSP300-14

Enables the detector tube to be securely set up for measuring and helps to avoid possible injury to the user as well as damage to the detector tube itself.

• Automatic air sampling pump GSP series

Sampling tube holder730

Tube holder for personal exposure measurement.

Belt loop pump holderGSP500FT-30

Case for personal wear.

Gas sampling pump tripod standGSP-TRIPOD

For use with GSP-300FT-2.

• Automatic air sampling pump GSP series

Collection tube heaterGTH-1

The air sampling is used to collect samples of harmful aldehydes, by connecting the ozone scrubber to the front stage and two DNPH collection tubes to the rear stage.
However, excessive moisture due to rain may interfere with collection by causing condensation in the collection tube.
The GTH-1 prevent voltage(plus 10ºC reliable to the outside air)thus enabling reliable samoling on a 24-hour basis.
In addition, the GHT-1 has a compact and lightweight desugn so it can be attached to the GSP series.

Holder for Various Collection TubesGSP-SH

The collection tube is set into the holder.

Tripod mounting platePLATE2

2 pumps can be mounted on the same tripod.

GSP-SH tripod adapterGSPSH-71

Necessary when installing the collection tube holder on a tripod.
* Applicable model: GSP-400FT

Detector tube adapterGSP300-13

Installed when mounting the detector tube and the collection tube on the GSP-400FT automatic gas sampling unit.
*Applicable model: GSP-300FT series / GSP-400FT

• Automatic air sampling pump GSP series

Sensor Extension Cable6H05/6H10/6H20/6H30

Remote measurement of low oxygen concentration levels is essential for compliance with safety regulations against anoxia.
Available in lengths of 5m, 10m, 20m, 30m.

Sensor Extension CableGOA7H-10/GOA7H-11/GOA7H-12/GOA7H-13

Remote measurement of low oxygen concentration levels is essential for compliance with safety regulations against anoxia.
Available in lengths of 5m, 10m, 20m, 30m.

Sensor Extension Cable for Use with GOA-40D-540D5-01/40D5-02/40D5-03/40D5-04/40D5-05/40D5-06

Provided every 5 m from 5-30 m.
* Applicable model: GOA-40D-5

Extension Hose1365A-5/1365A-10/1365A-15/1365A-20

Easy attachment or removal with one-touch coupler.
Available in lengths of 5m, 10m, 15m, 20m.
* Applicable model:MA-2510/MAM-2510/GOM-3A/GOM-3AL/GOMH-3A/GOMC-3A/GOMHC-3A